A Think Again Media Group publication
On This Day Quiz

The Moon landing with an older spacecraft next door

Surveyor 3 visit: a meeting between two lunar missions

By Phil Springer, Editor · Published · On This Day Quiz

Surveyor 3 visit: a meeting between two lunar missions

The Surveyor 3 visit joined two lunar missions separated by more than two years. On November 19, 1969, Apollo 12 landed in the Ocean of Storms near a robotic spacecraft that had reached the Moon in 1967. Charles Conrad Jr. and Alan Bean descended to the surface, while Richard Gordon remained in lunar orbit. Their destination included an earlier American machine whose camera, scoop, and exposed surfaces could become samples from a long stay on another world.

Surveyor 3 had launched on April 17, 1967, and landed on April 20 in Universal Time. NASA's mission history describes an arrival complicated by reflective rocks that confused its radar. The spacecraft bounced twice before settling on its third contact with the surface. Within an hour it began sending television pictures; its eventual total was 6,326. Its surface sampler dug trenches, performed bearing tests, and manipulated lunar material within the camera's field of view.

That robotic work had addressed an important uncertainty about the landing surface. NASA's account states that the sampling results indicated material with a consistency resembling wet sand and sufficient bearing strength for an Apollo lunar module. Surveyor's final contact with Earth came on May 4, 1967. The machine then remained at its landing site, preserving both its hardware and the disturbances its sampler and footpads had made in the surrounding ground.

Apollo 12's March 1970 mission report identified precision landing as a mission objective. It placed the touchdown 535 feet from Surveyor 3. The crew made small manual corrections during the final stages of an otherwise automatically guided descent. The landing position near the crater's far rim also reflected a preflight preference for staying outside a 500-foot radius around Surveyor, limiting the effects of the descent engine's exhaust and the dust it disturbed.

NASA's mission chronology separates landing from the Surveyor 3 visit itself. Touchdown occurred at about 06:54 Universal Time on November 19. Conrad reached the surface later that day, followed by Bean. During their first excursion they deployed an antenna, a solar-wind experiment, and a package of scientific instruments. Their second excursion began at about 03:54 on November 20. The chronology places inspection of the Surveyor spacecraft at about 06:15 that morning, during the geological traverse.

A photograph dated November 20 records the two missions in one view. Surveyor occupies the foreground, with the Apollo lunar module behind it. Conrad stands beside the robotic craft's television camera before its removal. NASA's caption identifies the camera and other retrieved pieces as material carried back for scientific examination. Gordon's place remained with the command and service modules above the surface, while the two men below conducted the inspection and recovery.

The mission report compared the new surface photographs with Surveyor's earlier views. Trenches dug by the robotic sampler and the patterned impression of a footpad appeared little changed after roughly two and a half years. Many components had acquired a thin dusty covering, although the initial report left room for other causes of discoloration. The returned pieces included a cable, painted and unpainted tubing, the television camera, and the scoop. The Surveyor 3 visit therefore supplied photographed context as well as physical specimens.

A separate 1970 engineering report examined the returned television camera in detail. The investigation covered electrical circuits, mechanical and optical assemblies, the image tube, internal materials, and surface coatings. Its purpose was to distinguish effects of lunar exposure from other sources of deterioration. The investigators reported that most camera components had withstood the environment well, apart from degradation associated with obsolete parts or components already regarded as suspect. They found no significant evidence of cold welding and very little evidence of micrometeoroid impact.

The same report attributed the conspicuous discoloration of surfaces to lunar dust and radiation damage. It also found that many anomalies arose from causes other than lunar exposure. That distinction gave the recovered machine a value beyond its appearance in the surface photographs: the camera could be examined component by component, with separate findings for different materials and kinds of damage. The report paired its camera results with a companion investigation of other recovered Surveyor hardware.

The Surveyor 3 visit ended before Apollo 12's lunar departure on November 20. The astronauts returned to their module with spacecraft pieces alongside geological samples, and the ascent stage later rejoined Gordon in orbit. A landing experiment from 1967 had become the subject of an inspection in 1969 and laboratory reports in 1970. The resulting records connect an exact landing objective, a photographed encounter, and attributed engineering findings about equipment exposed on the Moon.

The Question

Which robotic lander was Apollo 12 sent to land near on November 19, 1969?

Show the answer

The Answer

Surveyor 3 was the target. NASA’s March 1970 mission report placed Apollo 12’s touchdown 535 feet from the robotic lander.

Send this question to a friend

Read next

By clicking “Send me a stumper” you agree to On This Day Quiz’s Terms of Use and Privacy Policy.